CCL & PCB Lamination Systems
NTRY's range of specialist PCB and CCL laminators includes CCL laminating vacuum hot presses, hot presses, and cold presses, as well as specialist PCB laminators. These presses are very efficient and can be designed with a range of different platen areas and capacities. All of these hydraulic presses can be equipped with automatic loading and unloading systems to greatly increase productivity, reduce expensive labor costs, and increase safety in the workplace. The CCL production system consists of 2 vacuum hot presses, 1 cold press, mobile carts, copper foil, prepreg loading station, finishing unloading station, platen tipping and cleaning system, and a CCL semi-finishing 4-edge trimmer. The system can be configured for different customer requirements.
Equipment and process details
Final parameters and system boundaries are confirmed against materials, process targets, capacity and site conditions.
Main copper-clad laminate press system Tech data:
| Parameter | Vacuum Hot Press |
|---|---|
TOTAL PRESSURE | 10000KN |
DAYLIGHT | 20 |
DAYLIGHT GAP | 100 mm |
HOT PLATEN | 1300X1300X55 mm |
CYLINDER (DIA X NOS) | Φ720 mm x2200 x 1 |
HEATING MEDIUM | THERMAL OIL |
TEMPERATURE TOLERANCE | 2 °C |
OPERATING PRESSURE | 26 MPa |
| Parameter | Cold Press |
|---|---|
TOTAL PRESSURE | 4000KN |
DAYLIGHT | 20 |
DAYLIGHT GAP | 110 mm |
HOT PLATEN | 1300X1300X45 mm |
CYLINDER (DIA X NOS) | Φ400 mm X 2200 mm x 1 |
COOLING MEDIUM | CYCLING COOL WATER |
DAYLIGHT | 20 |
|---|---|
STROKE | 1700 |
LOADING | 1000 kg |
TRUCK SPEED | 4-6 m/min |
DAYLIGHT | 20 |
|---|---|
DAYLIGHT GAP | 165 mm |
LOADING CAPACITY | 1000 kg |
FEEDING SPEED | 3 m/min |
WORKING LEVEL | 800 mm |
TIME TO REALIZE VACUUM DEGREE | 10MIN (0-730mmHg) |
|---|---|
VACUUM DEGREE MAX | LESS THAN 730mmHg |
TOTAL POWER | 44 kW |
Procurement guide
The published scope covers two vacuum hot presses, one cold press, loading and unloading stations and carts, platen handling and cleaning, and four-edge trimming. The final battery limits remain project-specific.
Confirm the laminate format, build-up, opening count, output target, heating and cooling utilities, automation boundary, and available plant layout before configuration.
Pressure, platen temperature uniformity, vacuum target, evacuation time, cycle timing, and loading accuracy should each be stated with a test condition and acceptance method in the technical agreement.
Provide the material system, finished panel size, stack and release arrangement, target capacity, shift pattern, site utilities, and required loading, unloading, and trimming scope.
Scroll horizontally and select an image to enlarge it
Project inquiry
This product is already attached to your inquiry. Add your material, capacity and project stage, and our sales and engineering teams will follow up.
